Pro SP Racer F3 300mm 2.4G 10CH FPV RC Quadcopter DIY Combo Carbon Fiber Brushless Camera Drone 700TVL with FPV Goggles Parts
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Categories
  • Free Delivery On Most Items
  • 99% Customers
    Feedbacks
  • 30 Days
    For Returns
  • Payment
    Secure System
  • Only Best
    Brands

Pro SP Racer F3 300mm 2.4G 10CH FPV RC Quadcopter DIY Combo Carbon Fiber Brushless Camera Drone 700TVL with FPV Goggles Parts

Available: In Stock
$503.20 $503.20
Image

Features 


1.  No compromise I/O. Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED
Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
2.  On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without
guesswork ( Deluxe).
3.  Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster
ARM-Cortex M4 core.
4.  Stackable design - perfect for integrating with OSDs and power distribution boards.
5. 16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side
mounted connectors.
6. Full support for OneShot ESCs for easy PID tuning and a sharper response.
7.  Supports SBus, SumH, SumD, 11024/2048, XBus, PPM, PWM receivers. No external inverters required
(built-in).
8. Dedicated output for programmable LEDs - great for orientation, racing and night flying.
9. Dedicated I2C port for connection of OLED display without needing flight battery.
10. Battery monitoring ports for voltage and current.
11. Sonar support for precision low-altitude hold.
12. Buzzer port for audible warnings and notifications.
13.  Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
14.  Symmetrical design for a super tidy wiring.
15.  Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
16.  Barometer mounted on the bottom of the board for easy wind isolation.
17.  Loop times up to ~2x as fast as previous-generation STM32F1 based boards.
18. Configuration of the flight controller via a cross-platform GUI (Windows/OSX/Linux).
19.  Supports a variety of aircraft, tricopters, quadcopters, hexacopters, octocopters, planes and more.
20.  Available in Acro and Deluxe versions.

Specifications: 


* 36x36mm board with 30.5mm mounting holes.
* ~5 grams.
* STM32F3 CPU.
* High-Capacity Flash (Acro and Deluxe)
* MPU6050 accelerometerro
* MS5611 barometer (Deluxe only)
* HMC5883 compass (Deluxe only)
* MicroUSB socket.
* 4x 4pin JST-SH sockets (I2C, SWD, 2xUART)
* 2x 8pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
* 8x 3pin though-holes for pin headers for ESC/Servo connections.
* 2x 4pin though-holes for pin headers for 2x serial ports.
* 2x 2pin though-holes for pin headers for battery voltage and buzzer.

Package included:

  • 300mm Frame Kit *1
  • Pro SP Racing F3 Flight Controller Deluxe 10DOF *1
  • Emax RSII 2306 Motor Race Spec CW 1600KV Brushless 3-6S * 2
  • Emax RSII 2306 Motor Race Spec CCW 1600KV Brushless 3-6S * 2
  • Flycolor Raptor BLS Pro 30A ESC Blheli-s Dshot * 4
  • 7045 3-Blade CW + CCW Propellers *2
  • Mini FPV Goggles 3 inch 480 x 320 Display Double Antenna 5.8G 40CH *1 (Some Combo Set not include this FPV Receiver)
  • Radiolink AT9S Remote Controller * 1 
  • 11.1V 2200MAH 25C/20C Lipo Battery * 1 
  • JMT A400 Digital 3S 4S Lipo Battery Balance Charger * 1
  • FPV Mini Video Camera COMS 700TVL 2.8mm Lens *1
  • 2000m Range 5.8G 400mW AV Wireless Transmitter *1
  • Mini Power Hub Power Distribution Board PDB with BEC 5V & 12V *1
  • 5V Buzzer Alarm Beeper  *1
  • Accessories bag * 1

Features 


1.  No compromise I/O. Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED
Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
2.  On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without
guesswork ( Deluxe).
3.  Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster
ARM-Cortex M4 core.
4.  Stackable design - perfect for integrating with OSDs and power distribution boards.
5. 16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side
mounted connectors.
6. Full support for OneShot ESCs for easy PID tuning and a sharper response.
7.  Supports SBus, SumH, SumD, 11024/2048, XBus, PPM, PWM receivers. No external inverters required
(built-in).
8. Dedicated output for programmable LEDs - great for orientation, racing and night flying.
9. Dedicated I2C port for connection of OLED display without needing flight battery.
10. Battery monitoring ports for voltage and current.
11. Sonar support for precision low-altitude hold.
12. Buzzer port for audible warnings and notifications.
13.  Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
14.  Symmetrical design for a super tidy wiring.
15.  Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
16.  Barometer mounted on the bottom of the board for easy wind isolation.
17.  Loop times up to ~2x as fast as previous-generation STM32F1 based boards.
18. Configuration of the flight controller via a cross-platform GUI (Windows/OSX/Linux).
19.  Supports a variety of aircraft, tricopters, quadcopters, hexacopters, octocopters, planes and more.
20.  Available in Acro and Deluxe versions.

Specifications: 


* 36x36mm board with 30.5mm mounting holes.
* ~5 grams.
* STM32F3 CPU.
* High-Capacity Flash (Acro and Deluxe)
* MPU6050 accelerometerro
* MS5611 barometer (Deluxe only)
* HMC5883 compass (Deluxe only)
* MicroUSB socket.
* 4x 4pin JST-SH sockets (I2C, SWD, 2xUART)
* 2x 8pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
* 8x 3pin though-holes for pin headers for ESC/Servo connections.
* 2x 4pin though-holes for pin headers for 2x serial ports.
* 2x 2pin though-holes for pin headers for battery voltage and buzzer.

Package included:

  • 300mm Frame Kit *1
  • Pro SP Racing F3 Flight Controller Deluxe 10DOF *1
  • Emax RSII 2306 Motor Race Spec CW 1600KV Brushless 3-6S * 2
  • Emax RSII 2306 Motor Race Spec CCW 1600KV Brushless 3-6S * 2
  • Flycolor Raptor BLS Pro 30A ESC Blheli-s Dshot * 4
  • 7045 3-Blade CW + CCW Propellers *2
  • Mini FPV Goggles 3 inch 480 x 320 Display Double Antenna 5.8G 40CH *1 (Some Combo Set not include this FPV Receiver)
  • Radiolink AT9S Remote Controller * 1 
  • 11.1V 2200MAH 25C/20C Lipo Battery * 1 
  • JMT A400 Digital 3S 4S Lipo Battery Balance Charger * 1
  • FPV Mini Video Camera COMS 700TVL 2.8mm Lens *1
  • 2000m Range 5.8G 400mW AV Wireless Transmitter *1
  • Mini Power Hub Power Distribution Board PDB with BEC 5V & 12V *1
  • 5V Buzzer Alarm Beeper  *1
  • Accessories bag * 1

What currency are the prices do I see in the site?
All prices are in USD.

I just placed an order, when will it ship?
We try our best to ship items as fast as we can. Please allow 4-7 days production time for your order to ship out, average shipping times are 15-21 days.

For US orders shipping times are 4-10 days.

Please see if items are shipped in your country which your shipping times are shorter. 


Tracking numbers will be updated 3-5 days after your order has been SHIPPED. If you don't have a tracking number after 7 business please email us at contact@fouracesgadgets.com.

I am not in love with my order, can it be returned? What if there is an issue?
We offer a 100 % money back guarantee, if the product is defective or damaged. We give you 30 days to send it back to us for a full refund. You must ship it back at your own expense, once we have received the product we will refund the full amount of your original purchase. Please Include all a name and order number on the returned parcels.
Please note: If you your package is on the way, you must wait for it to arrive and return it before receiving a refund.

Can I cancel my order?
You are able to cancel your order with no penalty! You must cancel your order before it ships. If the item is already sent please use our easy return system to get a full refund.

I have entered an incorrect address what do I do now?
If you have miss spelled or auto filled in a incorrect address, simply reply to your order conformation email and confirm. Once you double check if the address given is wrong kindly notify us via email at contact@fouracesgadgets.com. If the given address is wrong we can change the address to the correct one within 24 hours. No refund will be given after the 24 hours of incorrect submission.

How long does shipping take?
Shipping times vary as we do ship worldwide from different fulfillment centers based on your location. The average shipping time is 15-25 business days.

For US orders average shipping is 4-10 business days

Please see if items are shipped in your country which your shipping times are shorter

I have a question that wasn't answered, can you please help?

Absolutely! We are here to help you make your home beautiful! Please send us an email to contact@fouracesgadgets.com and we will be happy to assist you in any way we can.
We do receive a large number of emails, If you wish to get a prompt response please attach your order number and address the problem clearly, thanks.

 

QUESTION: Do we ship Personal Protection products internationally?

ANSWER: We do ship to other countries, but because of the nature of some of our products, we are not able to ship all of our products. For instance, pepper spray and stun guns are classified as weapons by our government so it takes a few weeks to get the paperwork in order to ship. You also need to consider the laws of the country you are shipping to. Our products are not legal in all countries.